changes holder.STL to holder3.STL in README.md

This commit is contained in:
Brendan Haines 2017-08-24 10:51:10 -06:00
parent 522505d54d
commit a631f89bbc

View File

@ -6,14 +6,14 @@ There are 2 variations of this mounting assembly which will be referred to as ve
## Version A ## Version A
Version A consists of 4 parts: Version A consists of 4 parts:
* holder.STL * holder3.STL
* t-top.STL * t-top.STL
* t-left.STL * t-left.STL
* t-right.STL * t-right.STL
holder.STL should be printed face down as below. Be sure to **use** support material as this will certainly fail without. This part will most likely be very difficult to remove from the bed of the printer due to its high surface area. holder3.STL should be printed face down as below. Be sure to **use** support material as this will certainly fail without. This part will most likely be very difficult to remove from the bed of the printer due to its high surface area.
![holder.STL orientation](images/holder_orientation.png) ![holder3.STL orientation](images/holder_orientation.png)
Once everything is assembled, a square of velcro can be placed in the top of this part where the PCB rests. PCB fit is shown below. Once everything is assembled, a square of velcro can be placed in the top of this part where the PCB rests. PCB fit is shown below.