mirror of
https://github.com/brendanhaines/eScooterHardware.git
synced 2024-12-24 18:06:53 -07:00
changes holder.STL to holder3.STL in README.md
This commit is contained in:
parent
522505d54d
commit
a631f89bbc
|
@ -6,14 +6,14 @@ There are 2 variations of this mounting assembly which will be referred to as ve
|
|||
## Version A
|
||||
|
||||
Version A consists of 4 parts:
|
||||
* holder.STL
|
||||
* holder3.STL
|
||||
* t-top.STL
|
||||
* t-left.STL
|
||||
* t-right.STL
|
||||
|
||||
holder.STL should be printed face down as below. Be sure to **use** support material as this will certainly fail without. This part will most likely be very difficult to remove from the bed of the printer due to its high surface area.
|
||||
holder3.STL should be printed face down as below. Be sure to **use** support material as this will certainly fail without. This part will most likely be very difficult to remove from the bed of the printer due to its high surface area.
|
||||
|
||||
![holder.STL orientation](images/holder_orientation.png)
|
||||
![holder3.STL orientation](images/holder_orientation.png)
|
||||
|
||||
Once everything is assembled, a square of velcro can be placed in the top of this part where the PCB rests. PCB fit is shown below.
|
||||
|
||||
|
|
Loading…
Reference in New Issue
Block a user