From a631f89bbc0c246c06c2ee110e40f016423da725 Mon Sep 17 00:00:00 2001 From: Brendan Haines Date: Thu, 24 Aug 2017 10:51:10 -0600 Subject: [PATCH] changes holder.STL to holder3.STL in README.md --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 84d6732..d83af1f 100644 --- a/README.md +++ b/README.md @@ -6,14 +6,14 @@ There are 2 variations of this mounting assembly which will be referred to as ve ## Version A Version A consists of 4 parts: -* holder.STL +* holder3.STL * t-top.STL * t-left.STL * t-right.STL -holder.STL should be printed face down as below. Be sure to **use** support material as this will certainly fail without. This part will most likely be very difficult to remove from the bed of the printer due to its high surface area. +holder3.STL should be printed face down as below. Be sure to **use** support material as this will certainly fail without. This part will most likely be very difficult to remove from the bed of the printer due to its high surface area. -![holder.STL orientation](images/holder_orientation.png) +![holder3.STL orientation](images/holder_orientation.png) Once everything is assembled, a square of velcro can be placed in the top of this part where the PCB rests. PCB fit is shown below.