make sim will now fail if test hits fail state

Makefile

@@ -47,9 +47,10 @@ $(BUILD_DIR)/%.elf: test/%.ld $(OBJ) | $(BUILD_DIR)
 	riscv64-linux-gnu-objcopy --target=verilog $< $@
 
 $(BUILD_DIR)/core_tb.vcd: $(BUILD_DIR)/tb.out $(BUILD_DIR)/test.hex
-	cd $(BUILD_DIR) && ./tb.out
+	cd $(BUILD_DIR) && ./tb.out | tee sim_log.txt
 
 sim: $(BUILD_DIR)/core_tb.vcd
+	@grep -q "SUCCESS" $(BUILD_DIR)/sim_log.txt
 
 ## General
 $(BUILD_DIR):

hdl/tb/core_tb.gtkw

@@ -1,15 +1,15 @@
 [*]
 [*] GTKWave Analyzer v3.3.103 (w)1999-2019 BSI
-[*] Sun Jul  4 01:38:44 2021
+[*] Sun Jul  4 02:57:58 2021
 [*]
 [dumpfile] "/home/brendan/Documents/Projects/0039_cpu/build/core_tb.vcd"
-[dumpfile_mtime] "Sun Jul  4 01:37:31 2021"
+[dumpfile_mtime] "Sun Jul  4 02:57:52 2021"
-[dumpfile_size] 682120
+[dumpfile_size] 500611
 [savefile] "/home/brendan/Documents/Projects/0039_cpu/hdl/tb/core_tb.gtkw"
-[timestart] 737900
+[timestart] 0
 [size] 1920 1016
 [pos] -1 -1
-*-13.000000 774000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
+*-19.000000 3297000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
 [treeopen] core_tb.
 [treeopen] core_tb.dut.
 [sst_width] 289
@@ -32,11 +32,12 @@ core_tb.mem_data_rvalid
 core_tb.mem_data_wdata[31:0]
 @28
 core_tb.mem_data_we
-@29
 core_tb.mem_data_wready
 @22
 core_tb.mem_inst_addr[31:0]
 core_tb.mem_inst_data[31:0]
+@23
+core_tb.\mem[2048][7:0]
 @200
 -
 -DUT

hdl/tb/core_tb.v

@@ -2,6 +2,8 @@
 
 module core_tb();
 
+localparam ADDR_FAILCODE = 32'h800;
+
 initial $timeformat(-9, 2, " ns", 20);
 initial begin: dump
     integer i;
@@ -10,6 +12,7 @@ initial begin: dump
     for (i=0; i<32; i=i+1) begin
         $dumpvars(0, dut.regfile[i]);
     end
+    $dumpvars(0, mem[ADDR_FAILCODE]);
 end
 
 reg clk, reset;
@@ -104,11 +107,30 @@ initial begin
     #10
     reset = 0;
     
-    #5000
+    #10000
     reset = 1;
     $finish;
 end
 
+always @(posedge clk) begin
+    #100
+    case ({mem[ADDR_FAILCODE+3], mem[ADDR_FAILCODE+2], mem[ADDR_FAILCODE+1], mem[ADDR_FAILCODE+0]})
+        32'h00000000: begin
+            // Initial value
+        end
+        32'hffffffff: begin
+            // Success
+            $display("%0t:\tSUCCESS: TEST PASSED", $time);
+            $finish;
+        end
+        default: begin
+            $display("%0t:\tERROR: FAILCODE = 0x%h", $time, {mem[ADDR_FAILCODE+3], mem[ADDR_FAILCODE+2], mem[ADDR_FAILCODE+1], mem[ADDR_FAILCODE+0]});
+            #200
+            $finish;
+        end
+    endcase
+end
+
 always #2 clk  = !clk;
 
 core dut(

test/test.S

@@ -219,7 +219,7 @@ test10:
     addi    x30, x0, 10          # x30 = 10
     # now for some memory stuff
     # sw
-    la      x9, someint         # x9  = start of .bss
+    la      x9, someint         # x9  = 
     lui     x10, 0x12345        # x10 = 0x12345000
     addi    x10, x10, 0x678     # x10 = 0x12345678
     nop
@@ -308,21 +308,41 @@ test13_done:
 
 
 done:
+    la      x31, failcode       # x30 = 
+    addi    x30, x0, 0xff       # x31 = 0x000000ff
+    slli    x30, x30, 8         # x31 = 0x0000ff00
+    addi    x30, x30, 0xff      # x31 = 0x0000ffff
+    slli    x30, x30, 8         # x31 = 0x00ffff00
+    addi    x30, x30, 0xff      # x31 = 0x00ffffff
+    slli    x30, x30, 8         # x31 = 0xffffff00
+    addi    x30, x30, 0xff      # x31 = 0xfffffffe
+    nop
+    nop
+    nop
+    nop
+    nop
+    sw      x30, 0(x31)         # failcode = 0xffffffff
+    nop
+    nop
+    nop
+    nop
+    nop
+
     lui     x30, 0x10101        # x30 = 0x10101000
     addi    x30, x30, 0x010     # x30 = 0x10101010
 
     # set registers to known values before loop
-    addi     x2, x0, 1         # x1 = 1
+    addi    x2, x0, 1           # x2 = 1
-    addi     x3, x0, 1         # x1 = 1
+    addi    x3, x0, 1           # x3 = 1
-    addi     x4, x0, 1         # x1 = 1
+    addi    x4, x0, 1           # x4 = 1
-    addi     x5, x0, 1         # x1 = 1
+    addi    x5, x0, 1           # x5 = 1
-    addi     x6, x0, 1         # x1 = 1
+    addi    x6, x0, 1           # x6 = 1
 
     # counter and infinite loop
-    addi     x31, x0, 1         # x1 = 1
+    addi    x31, x0, 1          # x1 = 1
 
 loop:
-    addi     x31, x31, 1        # increment x1
+    addi    x31, x31, 1         # increment x1
     jal     x1, loop            # loop forever
     addi    x2, x0, 0           # NOTE: this should never be executed
     addi    x3, x0, 0           # NOTE: this should never be executed
@@ -337,6 +357,18 @@ loop:
     nop
 
 fail:
+    la      x31, failcode       # x31 =
+    nop
+    nop
+    nop
+    nop
+    nop
+    sw      x30, 0(x31)         # failcode = test number
+    nop
+    nop
+    nop
+    nop
+    nop
     # set some registers to make it blatantly obvious an error occurred
     addi    x1, x0, 0x7ff       # x1 = 0x1111
     addi    x2, x0, 0x7ff       # x1 = 0x1111
@@ -368,6 +400,8 @@ test_jalr:
 
 
 .data
+failcode:
+    .word 0x00000000
 someint:
     .word 0xfedcba98
 someint16: