45 lines
1.5 KiB
Markdown
45 lines
1.5 KiB
Markdown
# 8000FPS Camera
|
|
|
|
Label: BS-HSC300V1-H640V200-8000FPS
|
|
|
|
## Sensor
|
|
|
|
ON Semiconductor LUPA3000
|
|
|
|
## Connectors
|
|
|
|
### Power
|
|
|
|
HR10A-7P-4S(73) or HR10-7P-4S(73) look like the right mating connector. Pinout is unknown, I will likely need to open the camera to determine how to wire it.
|
|
|
|
Pin | Wire Color | PCB Connection
|
|
---|---|---
|
|
1, 2 (left when looking into pins from the mating side with key up) | Green | CN1 pin 1
|
|
3, 4 | Black | CN1 pin 2
|
|
|
|
CN1 pin 1 goes through a fuse followed by a shunt diode. This makes me sad but it looks like they used shunt reverse polarity protection, not series :,(.
|
|
|
|
The fuse is marked `X050F OORZ`. This appears to be a PTC with part number SMD050F ([product page](https://www.littelfuse.com/products/polyswitch-resettable-pptcs/surface-mount/smd/smd050f_2.aspx)) (0.5A hold, 1A trip). The designers are redeemed in my eyes.
|
|
|
|
Based on the diode polarity, connectivity to power filter ([BNX022]()), and wire colors I think it is safe to say that CN1 pin 2 is GND and CN1 pin 1 is power.
|
|
|
|
Goes to Cosel MGS152405 power supply:
|
|
|
|
Model | MGS152405
|
|
---|---
|
|
Input Voltage | 18-36 VDC
|
|
Input Current | 0.7 A typical
|
|
Max Output Wattage | 15 W
|
|
Output Voltage | 5 VDC
|
|
Output Current | 3 A
|
|
|
|
To safely power this, I need 18-36V, 1A minimum.
|
|
|
|
### Data
|
|
|
|
4 DIN 1.0/2.3 connectors for CoaXPress
|
|
|
|
## Resources:
|
|
|
|
- [Sensor datasheet](https://www.1stvision.com/cameras/sensor_specs/NOIL1SN3000A-D.pdf) ([saved here](./NOIL1SN3000A-D.pdf))
|
|
- [Connector datasheet](https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/17/HR10_Rev2010.pdf) ([saved here](./HR10_Rev2010.pdf)) |