coaxpress/resource/camera/README.md

# 8000FPS Camera

Label: BS-HSC300V1-H640V200-8000FPS

## Sensor

ON Semiconductor LUPA3000

## Connectors

### Power

HR10A-7P-4S(73) or HR10-7P-4S(73) look like the right mating connector. Pinout is unknown, I will likely need to open the camera to determine how to wire it.

Pin | Wire Color | PCB Connection
---|---|---
1, 2 (left when looking into pins from the mating side with key up) | Green | CN1 pin 1
3, 4 | Black | CN1 pin 2

CN1 pin 1 goes through a fuse followed by a shunt diode. This makes me sad but it looks like they used shunt reverse polarity protection, not series :,(.

The fuse is marked `X050F OORZ`. This appears to be a PTC with part number SMD050F ([product page](https://www.littelfuse.com/products/polyswitch-resettable-pptcs/surface-mount/smd/smd050f_2.aspx)) (0.5A hold, 1A trip). The designers are redeemed in my eyes.

Based on the diode polarity, connectivity to power filter ([BNX022]()), and wire colors I think it is safe to say that CN1 pin 2 is GND and CN1 pin 1 is power.

Goes to Cosel MGS152405 power supply:

Model | MGS152405
---|---
Input Voltage | 18-36 VDC
Input Current | 0.7 A typical
Max Output Wattage | 15 W
Output Voltage | 5 VDC
Output Current | 3 A

To safely power this, I need 18-36V, 1A minimum.

### Data

4 DIN 1.0/2.3 connectors for CoaXPress

## Resources:

- [Sensor datasheet](https://www.1stvision.com/cameras/sensor_specs/NOIL1SN3000A-D.pdf) ([saved here](./NOIL1SN3000A-D.pdf))
- [Connector datasheet](https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/17/HR10_Rev2010.pdf) ([saved here](./HR10_Rev2010.pdf))