cpu/hdl/other_projects/axi_lite_memory.v

module axi_lite_memory(
    // Global
    input                               ACLK,
    input                               ARESETn,

    // Write address
    input                               AWVALID,
    input       [ADDR_WIDTH-1:0]        AWADDR,
    input       [2:0]                   AWPROT,
    output  reg                         AWREADY,

    // Write data
    input                               WVALID,
    input       [DATA_WIDTH-1:0]        WDATA,
    input       [(DATA_WIDTH/8)-1:0]    WSTRB,
    output  reg                         WREADY,

    // Write response
    output  reg                         BVALID,
    input                               BREADY,
    output  reg [1:0]                   BRESP,

    // Read address
    input                               ARVALID,
    input       [ADDR_WIDTH-1:0]        ARADDR,
    input       [2:0]                   ARPROT,     // IGNORED
    output  reg                         ARREADY,

    // Read data
    output  reg                         RVALID,
    output  reg [DATA_WIDTH-1:0]        RDATA,
    output  reg [1:0]                   RRESP,
    input                               RREADY,

    // Wishbone write
    output  reg [ADDR_WIDTH-1:0]        WB_WADDR,
    output  reg [2:0]                   WB_WPROT,
    output  reg [DATA_WIDTH-1:0]        WB_WDATA,
    output  reg [(DATA_WIDTH/8)-1:0]    WB_WSTRB,
    output  reg                         WB_WVALID = 0,
    input                               WB_WREADY,

    // Wishbone read
    output  reg [ADDR_WIDTH-1:0]        WB_RADDR,
    input       [DATA_WIDTH-1:0]        WB_RDATA,
    input                               WB_RVALID,
    output  reg                         WB_RREADY
);

parameter DATA_WIDTH = 32;  // Only 32 allowed for now (AXI-Lite allows 32 or 64). 64 might work but I haven't investigated it yet.
parameter ADDR_WIDTH = 12;  // No minimum requirement. Typically at least 12b (4KB)
parameter SYNC_DEPTH = 1;   // Minimum recommended: 2. Larger synchronizer depth allows for larger delay between AXI address and data without stalling.

reg [ADDR_WIDTH-1:0]            sync_awaddr [0:SYNC_DEPTH-1];
reg [2:0]                       sync_awprot [0:SYNC_DEPTH-1];
reg [$clog2(SYNC_DEPTH)+1:0]    sync_aw_fill = 0;

reg [DATA_WIDTH-1:0]            sync_wdata  [0:SYNC_DEPTH-1];
reg [(DATA_WIDTH/8)-1:0]         sync_wstrb  [0:SYNC_DEPTH-1];
reg [$clog2(SYNC_DEPTH)+1:0]    sync_w_fill = 0;

reg [1:0]                       sync_bresp  [0:SYNC_DEPTH-1];   // TODO: make this not be the same sync_depth?
reg [$clog2(SYNC_DEPTH)+1:0]    sync_b_fill = 0;

localparam  RESP_OKAY   = 2'b00,
            RESP_EXOKAY = 2'b01,
            RESP_SLVERR = 2'b10,
            RESP_DECERR = 2'b11;

always @(*) begin
    AWREADY = sync_aw_fill < SYNC_DEPTH;
    WREADY  = sync_w_fill < SYNC_DEPTH;

    BRESP   = RESP_OKAY;        // TODO: add support for responses other than OKAY
    BVALID  = sync_b_fill > 0;
end

always @(posedge ACLK or negedge ARESETn) begin: clk_update
    integer i;
    
    // Write direction
    integer event_wb_write;
    integer event_aw;
    integer event_w;
    integer event_b;

    // Read direction
    integer event_wb_read;
    integer event_ar;
    integer event_r;

    // Write direction
    event_wb_write = 0;
    event_aw = 0;
    event_w = 0;
    event_b = 0;

    // Read direction
    event_wb_read = 0;
    event_ar = 0;
    event_r = 0;

    if (ARESETn == 0) begin
        // TODO: deal with reset
        sync_aw_fill <= 0;
        sync_w_fill <= 0;
        sync_b_fill <= 0;
    end else begin
        if (AWREADY && AWVALID) begin
            event_aw = 1;
            for (i=0; i<sync_aw_fill; i=i+1) begin
                sync_awaddr[i+1] <= sync_awaddr[i];
                sync_awprot[i+1] <= sync_awprot[i];
            end
            sync_awaddr[0] <= AWADDR;
            sync_awprot[0] <= AWPROT;
        end

        if (WREADY && WVALID) begin
            event_w = 1;
            for (i=0; i<sync_w_fill; i=i+1) begin
                sync_wdata[i+1] <= sync_wstrb[i];
                sync_wstrb[i+1] <= sync_wstrb[i];
            end
            sync_wdata[sync_w_fill] <= WDATA;
            sync_wstrb[sync_w_fill] <= WSTRB;
        end

        if (BREADY && BVALID) begin
            event_b = 1;
        end

        if (WB_WREADY || !WB_WVALID) begin
            event_wb_write = 1;
            if (sync_aw_fill > 0 && sync_w_fill > 0) begin
                WB_WVALID <= 1'b1;
                WB_WADDR <= sync_awaddr[sync_aw_fill-1];
                WB_WPROT <= sync_awprot[sync_aw_fill-1];
                WB_WDATA <= sync_wdata[sync_w_fill-1];
                WB_WSTRB <= sync_wstrb[sync_w_fill-1];
            end else begin
                WB_WVALID <= 1'b0;
            end
        end

        sync_aw_fill    <= sync_aw_fill + event_aw - event_wb_write;
        sync_w_fill     <= sync_w_fill + event_w - event_wb_write;
        sync_b_fill     <= sync_b_fill - event_b + event_wb_write;  // TODO: is this right?
    end
end

endmodule