1.6 KiB
8000FPS Camera
Label: BS-HSC300V1-H640V200-8000FPS
Sensor
ON Semiconductor LUPA3000
Connectors
Power
HR10A-7P-4S(73) or HR10-7P-4S(73) look like the right mating connector. Pinout is unknown, I will likely need to open the camera to determine how to wire it.
| Pin | Wire Color | PCB Connection |
|---|---|---|
| 1, 2 (left when looking into pins from the mating side with key up) | Green | CN1 pin 1 |
| 3, 4 | Black | CN1 pin 2 |
CN1 pin 1 goes through a fuse followed by a shunt diode. This makes me sad but it looks like they used shunt reverse polarity protection, not series 😢.
The fuse is marked X050F OORZ. This appears to be a PTC with part number SMD050F (product page) (0.5A hold, 1A trip). The designers are redeemed in my eyes.
Based on the diode polarity, connectivity to power filter (BNX022), and wire colors I think it is safe to say that CN1 pin 2 is GND and CN1 pin 1 is power.
Goes to Cosel MGS152405 power supply:
| Model | MGS152405 |
|---|---|
| Input Voltage | 18-36 VDC |
| Input Current | 0.7 A typical |
| Max Output Wattage | 15 W |
| Output Voltage | 5 VDC |
| Output Current | 3 A |
To safely power this, I need 18-36V, 1A minimum.
Data
4 DIN 1.0/2.3 connectors for CoaXPress