blinky works on mellifera

boards/bh/mellifera_rev1/Kconfig

@@ -1,8 +1,12 @@
 # Copyright (c) 2021 Nordic Semiconductor ASA
 # SPDX-License-Identifier: Apache-2.0
 
+if BOARD_MELLIFERA_REV1
+
 config BOARD_ENABLE_DCDC
 	bool "Enable DCDC mode"
 	select SOC_DCDC_NRF52X
 	default y
-	depends on BOARD_CUSTOM_PLANK
+	depends on BOARD_MELLIFERA_REV1
+
+endif # BOARD_MELLIFERA_REV1

boards/bh/mellifera_rev1/Kconfig.mellifera_rev1

@@ -1,5 +1,5 @@
 # Copyright (c) 2021 Nordic Semiconductor ASA
 # SPDX-License-Identifier: Apache-2.0
 
-config BOARD_CUSTOM_PLANK
+config BOARD_MELLIFERA_REV1
-	select SOC_NRF52840_QIAA
+	select SOC_NRF52832_QFAA

boards/bh/mellifera_rev1/board.cmake

@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: Apache-2.0
 
 board_runner_args(jlink "--device=nrf52" "--speed=4000")
-board_runner_args(pyocd "--target=nrf52840" "--frequency=4000000")
+board_runner_args(pyocd "--target=nrf52832" "--frequency=4000000")
 
 set(OPENOCD_NRF5_SUBFAMILY "nrf52")
 

boards/bh/mellifera_rev1/board.yml

@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: Apache-2.0
 
 board:
-  name: custom_plank
+  name: mellifera_rev1
-  vendor: vendor
+  vendor: bh
   socs:
-    - name: nrf52840
+    - name: nrf52832

boards/bh/mellifera_rev1/mellifera_rev1-pinctrl.dtsi

@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2022 Nordic Semiconductor ASA
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&pinctrl {
+	// uart0_default: uart0_default {
+	// 	group1 {
+	// 		psels = <NRF_PSEL(UART_TX, 0, 6)>,
+	// 			<NRF_PSEL(UART_RX, 0, 8)>,
+	// 			<NRF_PSEL(UART_RTS, 0, 5)>,
+	// 			<NRF_PSEL(UART_CTS, 0, 7)>;
+	// 	};
+	// };
+
+	// uart0_sleep: uart0_sleep {
+	// 	group1 {
+	// 		psels = <NRF_PSEL(UART_TX, 0, 6)>,
+	// 			<NRF_PSEL(UART_RX, 0, 8)>,
+	// 			<NRF_PSEL(UART_RTS, 0, 5)>,
+	// 			<NRF_PSEL(UART_CTS, 0, 7)>;
+	// 		low-power-enable;
+	// 	};
+	// };
+
+
+	uart0_default: uart0_default {
+		group1 {
+			psels = <NRF_PSEL(UART_TX, 0, 5)>,
+				<NRF_PSEL(UART_RX, 0, 11)>;
+		};
+	};
+
+	uart0_sleep: uart0_sleep {
+		group1 {
+			psels = <NRF_PSEL(UART_TX, 0, 5)>,
+				<NRF_PSEL(UART_RX, 0, 11)>;
+			low-power-enable;
+		};
+	};
+
+
+};

boards/bh/mellifera_rev1/mellifera_rev1.dts

@@ -4,12 +4,12 @@
  */
 
 /dts-v1/;
-#include <nordic/nrf52840_qiaa.dtsi>
+#include <nordic/nrf52832_qfaa.dtsi>
-#include "custom_plank-pinctrl.dtsi"
+#include "mellifera_rev1-pinctrl.dtsi"
 
 / {
-	model = "Custom Plank Board";
+	model = "Mellifera rev1";
-	compatible = "vendor,custom-plank";
+	compatible = "bh,mellifera_rev1";
 
 	chosen {
 		zephyr,console = &uart0;
@@ -19,12 +19,12 @@
 
 	example_sensor: example-sensor {
 		compatible = "zephyr,example-sensor";
-		input-gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+		input-gpios = <&gpio0 2 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
 	};
 
 	blink_led: blink-led {
 		compatible = "blink-gpio-led";
-		led-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		led-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		blink-period-ms = <1000>;
 	};
 };

boards/bh/mellifera_rev1/mellifera_rev1.yaml

@@ -0,0 +1,40 @@
+# Copyright (c) 2021 Nordic Semiconductor ASA
+# SPDX-License-Identifier: Apache-2.0
+
+identifier: mellifera_rev1
+name: Mellifera-Rev1
+# vendor: bh
+# type: mcu
+# arch: arm
+# ram: 256
+# flash: 1024
+# toolchain:
+#   - zephyr
+#   - gnuarmemb
+#   - xtools
+# supported:
+#   - gpio
+
+# identifier: nrf52dk/nrf52832
+# name: nRF52-DK-NRF52832
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+ram: 64
+flash: 512
+supported:
+  - adc
+  - arduino_gpio
+  - arduino_i2c
+  - arduino_spi
+  - gpio
+  - counter
+  - nvs
+  - i2c
+  - pwm
+  - spi
+  - watchdog
+vendor: nordic

boards/vendor/custom_plank/custom_plank-pinctrl.dtsi

@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2022 Nordic Semiconductor ASA
- * SPDX-License-Identifier: Apache-2.0
- */
-
-&pinctrl {
-	uart0_default: uart0_default {
-		group1 {
-			psels = <NRF_PSEL(UART_TX, 0, 6)>,
-				<NRF_PSEL(UART_RX, 0, 8)>,
-				<NRF_PSEL(UART_RTS, 0, 5)>,
-				<NRF_PSEL(UART_CTS, 0, 7)>;
-		};
-	};
-
-	uart0_sleep: uart0_sleep {
-		group1 {
-			psels = <NRF_PSEL(UART_TX, 0, 6)>,
-				<NRF_PSEL(UART_RX, 0, 8)>,
-				<NRF_PSEL(UART_RTS, 0, 5)>,
-				<NRF_PSEL(UART_CTS, 0, 7)>;
-			low-power-enable;
-		};
-	};
-
-};

boards/vendor/custom_plank/custom_plank.yaml

@@ -1,16 +0,0 @@
-# Copyright (c) 2021 Nordic Semiconductor ASA
-# SPDX-License-Identifier: Apache-2.0
-
-identifier: custom_plank
-name: Custom-Plank
-vendor: vendor
-type: mcu
-arch: arm
-ram: 256
-flash: 1024
-toolchain:
-  - zephyr
-  - gnuarmemb
-  - xtools
-supported:
-  - gpio