successfully reading temperature from BMX

app/src/main.c

@@ -46,7 +46,7 @@ int main(void)
 		}
 	}
 
-	printf("Initialized %s\n", dev->name);
+	LOG_INF("Initialized %s\n", dev->name);
 
 	if (cfb_framebuffer_init(dev))
 	{
@@ -106,7 +106,7 @@ int main(void)
 		LOG_ERR("Device %s not ready\n", bmx->name);
 		return 0;
 	}
-	printf("Initialized %s\n", bmx->name);
+	LOG_INF("Initialized %s\n", bmx->name);
 
 	// hdc = DEVICE_DT_GET(DT_NODELABEL(hdc1080));
 	// if (!device_is_ready(dev))
@@ -156,7 +156,20 @@ int main(void)
 			LOG_ERR("Could not get pressure (%d)", ret);
 			return 0;
 		}
-		ret = sensor_channel_get(bmp, SENSOR_CHAN_AMBIENT_TEMP, &temperature);
+		// ret = sensor_channel_get(bmp, SENSOR_CHAN_AMBIENT_TEMP, &temperature);
+		// if (ret < 0)
+		// {
+		// 	LOG_ERR("Could not get temperature (%d)", ret);
+		// 	return 0;
+		// }
+
+		ret = sensor_sample_fetch(bmx);
+		if (ret < 0)
+		{
+			LOG_ERR("Could not fetch sample (%d)", ret);
+			return 0;
+		}
+		ret = sensor_channel_get(bmx, SENSOR_CHAN_DIE_TEMP, &temperature);
 		if (ret < 0)
 		{
 			LOG_ERR("Could not get temperature (%d)", ret);
@@ -182,7 +195,7 @@ int main(void)
 		sprintf(str_t, "T:%03d.%04d", temperature.val1, temperature.val2 / 100);
 		sprintf(str_h, "H:%05d.%06d", humidity.val1, humidity.val2);
 
-		printf("%s\t%s\t%s\t%s\n", str_v, str_i, str_p, str_t);
+		// printf("%s\t%s\t%s\t%s\n", str_v, str_i, str_p, str_t);
 
 		cfb_framebuffer_clear(dev, false);
 		if (cfb_print(dev, str_v, 0, 0))

drivers/sensor/bmx055/bmx055.c

@@ -13,9 +13,72 @@
 #include <zephyr/logging/log.h>
 LOG_MODULE_REGISTER(bmx055, CONFIG_SENSOR_LOG_LEVEL);
 
+// Accelerometer registers
+const uint8_t REG_BWG_CHIPID = 0x00;
+const uint8_t REG_ACCD_X_LSB = 0x02;
+const uint8_t REG_ACCD_X_MSB = 0x03;
+const uint8_t REG_ACCD_Y_LSB = 0x04;
+const uint8_t REG_ACCD_Y_MSB = 0x05;
+const uint8_t REG_ACCD_Z_LSB = 0x06;
+const uint8_t REG_ACCD_Z_MSB = 0x07;
+const uint8_t REG_ACCD_TEMP = 0x08;
+const uint8_t REG_INT_STATUS_0 = 0x09;
+const uint8_t REG_INT_STATUS_1 = 0x0A;
+const uint8_t REG_INT_STATUS_2 = 0x0B;
+const uint8_t REG_INT_STATUS_3 = 0x0C;
+const uint8_t REG_FIFO_STATUS = 0x0E;
+const uint8_t REG_PMU_RANGE = 0x0F;
+const uint8_t REG_PMU_BW = 0x10;
+const uint8_t REG_PMU_LPW = 0x11;
+const uint8_t REG_PMU_LOW_POWER = 0x12;
+const uint8_t REG_ACCD_HBW = 0x13;
+const uint8_t REG_BGW_SOFTRESET = 0x14;
+const uint8_t REG_INT_EN_0 = 0x16;
+const uint8_t REG_INT_EN_1 = 0x17;
+const uint8_t REG_INT_EN_2 = 0x18;
+const uint8_t REG_INT_MAP_0 = 0x19;
+const uint8_t REG_INT_MAP_1 = 0x1A;
+const uint8_t REG_INT_MAP_2 = 0x1B;
+const uint8_t REG_INT_SRC = 0x1E;
+const uint8_t REG_INT_OUT_CTRL = 0x20;
+const uint8_t REG_INT_RST_LATCH = 0x21;
+const uint8_t REG_INT_0 = 0x22;
+const uint8_t REG_INT_1 = 0x23;
+const uint8_t REG_INT_2 = 0x24;
+const uint8_t REG_INT_3 = 0x25;
+const uint8_t REG_INT_4 = 0x26;
+const uint8_t REG_INT_5 = 0x27;
+const uint8_t REG_INT_6 = 0x28;
+const uint8_t REG_INT_7 = 0x29;
+const uint8_t REG_INT_8 = 0x2A;
+const uint8_t REG_INT_9 = 0x2B;
+const uint8_t REG_INT_A = 0x2C;
+const uint8_t REG_INT_B = 0x2D;
+const uint8_t REG_INT_C = 0x2E;
+const uint8_t REG_INT_D = 0x2F;
+const uint8_t REG_FIFO_CONFIG_0 = 0x30;
+const uint8_t REG_PMU_SELF_TEST = 0x32;
+const uint8_t REG_TRIM_NVM_CTRL = 0x33;
+const uint8_t REG_BGW_SPI3_WDT = 0x34;
+const uint8_t REG_OFC_CTRL = 0x36;
+const uint8_t REG_OFC_SETTING = 0x37;
+const uint8_t REG_OFC_OFFSET_X = 0x38;
+const uint8_t REG_OFC_OFFSET_Y = 0x39;
+const uint8_t REG_OFC_OFFSET_Z = 0x3A;
+const uint8_t REG_TRIM_GP0 = 0x3B;
+const uint8_t REG_TRIM_GP1 = 0x3C;
+const uint8_t REG_FIFO_CONFIG_1 = 0x3E;
+const uint8_t REG_FIFO_DATA = 0x3F;
+
 struct bmx055_data
 {
-    int state;
+    int16_t accel_x;
+    int16_t accel_y;
+    int16_t accel_z;
+    int16_t gyro_x;
+    int16_t gyro_y;
+    int16_t gyro_z;
+    int8_t temperature;
 };
 
 struct bmx055_config
@@ -29,40 +92,19 @@ struct bmx055_config
 #endif /* CONFIG_INA230_TRIGGER */
 };
 
-// int bmx055_reg_read(const struct i2c_dt_spec *bus, uint8_t reg, uint8_t *val)
-// {
-//     uint8_t data[2];
-//     int ret;
-
-//     ret = i2c_burst_read_dt(bus, reg, data, sizeof(data));
-//     if (ret < 0)
-//     {
-//         return ret;
-//     }
-
-//     *val = sys_get_be16(data);
-
-//     return ret;
-// }
-
-// int bmx055_reg_write(const struct i2c_dt_spec *bus, uint8_t reg, uint8_t val)
-// {
-//     uint8_t tx_buf[2];
-
-//     tx_buf[0] = reg;
-//     tx_buf[1] = val;
-
-//     return i2c_write_dt(bus, tx_buf, sizeof(tx_buf));
-// }
-
 static int bmx055_sample_fetch(const struct device *dev,
                                enum sensor_channel chan)
 {
-    // const struct bmx055_config *config = dev->config;
+    const struct bmx055_config *config = dev->config;
     struct bmx055_data *data = dev->data;
+    int ret;
 
-    // data->state = gpio_pin_get_dt(&config->input);
+    ret = i2c_burst_read_dt(&config->bus, REG_ACCD_TEMP, &data->temperature, sizeof(data->temperature));
-    data->state = 0;
+    if (ret < 0)
+    {
+        LOG_ERR("Failed to read temperature register!");
+        return ret;
+    }
 
     return 0;
 }
@@ -73,13 +115,17 @@ static int bmx055_channel_get(const struct device *dev,
 {
     struct bmx055_data *data = dev->data;
 
-    if (chan != SENSOR_CHAN_PROX)
+    switch (chan)
     {
+    case SENSOR_CHAN_DIE_TEMP:
+        // 0.5K/LSB, center temperature is 23C
+        val->val1 = 23 + data->temperature / 2;
+        val->val2 = 0; // TODO: don't throw out LSB
+        break;
+    default:
         return -ENOTSUP;
     }
 
-    val->val1 = data->state;
-
     return 0;
 }
 
@@ -99,7 +145,6 @@ static int bmx055_init(const struct device *dev)
         return -ENODEV;
     }
 
-    const uint8_t REG_BWG_CHIPID = 0x00;
     uint8_t chip_id;
     ret = i2c_burst_read_dt(&config->bus, REG_BWG_CHIPID, &chip_id, sizeof(chip_id));
     if (ret < 0)