brendanhaines/charon_vna
1
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

update README.md

Browse Source
This commit is contained in:
Brendan Haines 2025-01-16 23:12:29 -07:00
parent 9a922762fa
commit 894d980a64
1 changed files with 25 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
README.md
View File

@ -12,22 +12,31 @@ On Ubuntu 22.04 just run `sudo apt-get install -y libiio-dev`
## Hardware Setup ## Hardware Setup
You need a few things: You need a few things:
- [Analog Devices Pluto SDR](https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/adalm-pluto.html). - [Analog Devices Pluto SDR](https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/adalm-pluto.html)
Any variant of the Pluto *should* work too such as the [Pluto+](https://github.com/plutoplus/plutoplus?tab=readme-ov-file) however I have only tested with the basic flavor. - Any variant of the Pluto *should* work too such as the [Pluto+](https://github.com/plutoplus/plutoplus?tab=readme-ov-file) however I have only tested with the basic flavor
- Directional couplers (1 per port up to 4 ports). - Note that you _must_ have two receive ports which means revision C or later of the basic Pluto
I have been using [AAMCS-UDC-0.5G-18G-10dB-Sf](http://www.aa-mcs.com/wp-content/uploads/documents/AAMCS-UDC-0.5G-18G-10dB-Sf.pdf) - Directional couplers (1 per port up to 4 ports)
- Charon switch board - coming soon. - I have been using [AAMCS-UDC-0.5G-18G-10dB-Sf](http://www.aa-mcs.com/wp-content/uploads/documents/AAMCS-UDC-0.5G-18G-10dB-Sf.pdf)
Without this, you'll be limited to S11 and uncalibrated S21 measurements (with required re-cabling). - Charon switch board - coming soon.
There's nothing special about this particular board, if you want more than 4 ports you can make your own pretty easily. You just need 3 SPxT switches. Note that these switches will see tons of cycles so avoid mechanical switches. - Optional. Without this you'll be limited to S11 and uncalibrated S21 measurements (with required re-cabling)
- There's nothing special about this particular board, if you want more than 4 ports you can make your own pretty easily. You just need 3 SPxT switches. Note that these switches will see tons of cycles so avoid mechanical switches
- SMA cables - SMA cables
- Calibration standard
- Ideally something with s-parameters measured on a better VNA
- I have used a basic SMA load and two modified SMA jacks with decent results
### Pluto Configuration ### Pluto Configuration
Most of my testing is with Pluto firmware [v0.39](https://github.com/analogdevicesinc/plutosdr-fw/releases/tag/v0.39) though this may work with other firmware versions. Instructions for upgrading firmware are on the [Analog Devices wiki](https://wiki.analog.com/university/tools/pluto/users/firmware). Most of my testing is with Pluto firmware [v0.39](https://github.com/analogdevicesinc/plutosdr-fw/releases/tag/v0.39) though this may work with other firmware versions. I had issues with the Pluto sometimes seeing no signal which resolved when I upgraded from v0.35. Instructions for upgrading firmware are on the [Analog Devices wiki](https://wiki.analog.com/university/tools/pluto/users/firmware).
We need two receive channels on the SDR. If you have a Pluto+ that should already be configured and you can skip this step. We need two receive channels on the SDR. If you have a Pluto+ that should already be configured and you can skip this step.
Analog devices has a [guide](https://wiki.analog.com/university/tools/pluto/users/customizing#updating_to_the_ad9364) for enabling the second channel. Ideally this should be set as `ad9361` to enable a wider band of operation in addition to the second channel, however the critical setting is enabling 2r2t. Analog devices has a [guide](https://wiki.analog.com/university/tools/pluto/users/customizing#updating_to_the_ad9364) for enabling the second channel. Ideally this should be set as `ad9361` to enable a wider band of operation in addition to the second channel, however the critical setting is enabling 2r2t. SSH into the Pluto and run the following:
```bash
fw_setenv attr_name compatible
fw_setenv attr_val ad9361
fw_setenv mode 2r2t
```
## Usage ## Usage
@ -46,3 +55,10 @@ Absolute output power is generally not well calibrated for VNAs anyway and has n
If you have an RF power meter you can generate your own power calibration. If you have an RF power meter you can generate your own power calibration.
Note that unlike the main calibration, power calibration frequencies do not need to match the measurement frequencies. Values are interpolated. Note that unlike the main calibration, power calibration frequencies do not need to match the measurement frequencies. Values are interpolated.
## References
#### Pluto Default Connection Settings
user: `root`
password: `analog`
ip: `192.168.2.1`